The battery must be fully charged before daily operation! If it is not charged, it will cause the EPX10000 to malfunction. If the display is abnormal, this may be the first time that the battery voltage is too low and must be charged. If the battery still has no power after charging the battery for a whole night, you need to replace the battery or charger, or the AC power outlet is dead. If the battery is partially charged, it may be necessary to replace the internal battery. A new fully charged battery can work for the EPX10000 for about 8 hours.
Before turning on the scanner, place the transmitter on the ground and connect the sensor antenna to the corresponding jack of the transmitter. When the transmitter is turned on. Never plug or unplug the sensor. If you do that, it will cause damage to the machine.
1.Detection depth range:5-50m
2. Detection distan cerange :100-1000m
3.Rechargeable battery:8 hours of continuous work
5.Thtemperaure range:45 to 85
7.16 bit processor speed,40MIPS –16MHz
8.32 bit DSS synthesis chip,wave from output
9.Digital frequency synthesisX20PLL,automatic frequency stabilizer,0.1MHz
10.Color LCD display,a resolution of 480 x 320 pixels